What are the preparations for UV printer startup
Source:
|
Author:hkwf93a9a
|
Published time: 2020-04-14
|
2723 Views
|
Share:
UV printers are used by us every day, but do we make good preparations before starting up every day? If the preparations are not done, turning the machine on and off repeatedly will only increase the UV printer’s hurt. So what do we need to prepare?
1 Inspection of key components. When the UV printer is ready to work, we inspect and lubricate the bearings, guide rods and other departments to reduce the resistance of the equipment to ensure the normal operation of printing.
2 Do a good job of cleaning. Check the nozzle, grating, guide bar, etc. of the UV printer, these parts will inevitably have dust and ink during the working day of the UV printer. All these need to be cleaned, and timely cleaning can ensure the clarity of the printed image.
3 Do a good job of inspection. Check whether the UV printer is connected properly, whether the ink is enough for the next uv printer to work, whether there is waste ink, whether the UV lamp is normal after turning on. If there are abnormalities, we must make timely adjustments.
4 Calibration and testing. Before turning on the UV printer, we need to calibrate the position of the UV printer, and perform a printing test to see if the printing effect meets the requirements. If it does not meet the need for adjustment.
